PDA

View Full Version : identifying g card

meow
10-08-2004, 01:14 PM
hey guys im having trouble ideintifying my graphics card. I know its radeon 9600 series but no which model. When i went to atiinfo.exe it said 9600 pro agp. Heres a screanshot of that: http://www.monkeyfiles.net/iuploader/ddddasda.jpg
Its either an se or a pro. It came in an se box but at the time i got it there was a manufacturing problem were they put pros in se boxes which is what i heard. A lot of people did get pros and i might be one of them. Any help?
meow
10-08-2004, 05:32 PM
someone please reply! :doh
ECA
10-08-2004, 07:11 PM
Ok,
HANG ON...
This aint EASY...
Drivers dont ALWAYS say...

FIND...DXDIAG.EXE....RUN it...
SELECT the VIDEO/display TAB
THAT should tell you..
meow
10-09-2004, 03:46 AM
it doesnt.al it says is 9600 series
ECA
10-09-2004, 07:36 AM
But what is the OTHER info shown??
Chipset, RamDac, RAM, Drivers, Version....
meow
10-09-2004, 03:03 PM
chipset:radeon 9600 series AGP
RAMDAC:Internal DAC 400 mhz
RAM:128mb
Driver:ati2dvag.dll
version:6.14.0010.6476
ECA
10-09-2004, 04:44 PM
http://www.ati.com/products/radeon9600/radeon9600pro/compare.html

Look at the RAM speed...
400mhz is the same as above...
9600 or 9600 SE
that is all Iv found...
meow
10-11-2004, 04:46 PM
one more thing. Compare this guys dxdiag with mine...he has a SE but a different dxdiag...here his:http://forums.relicnews.com/showthread.php?p=598676#post598676
meow
10-11-2004, 04:49 PM
and herey display dxdiag:
---------------
Display Devices
---------------
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_00021002&REV_00
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (70Hz)
Monitor: hp pavilion f70
Monitor Max Res: 1280,1024
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6476 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/25/2004 13:29:04, 209408 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 8/25/2004 13:28:46, 787456 bytes
Device Identifier: {D7B71EE2-0210-11CF-FE6A-0820A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x00021002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
wierd huh?
ECA
10-11-2004, 05:13 PM
The above is YOUR DXDIAG?
Yes they are simular..

Do you have Xp HOME sp1, DX 9.0c?
AND NEITHER OF you has run the configuration tests...
meow
10-11-2004, 05:16 PM
the one above is mine and they are not similiar. That other guy in the link has the SE for sure. Look at his chipset. And look at my chipset. I have SP2 XP HOME and 9.0C
ECA
10-11-2004, 06:13 PM
[/QUOTE] Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 SE AGP (0x4151)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4151&SUBSYS_40301458&REV_00
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6467 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/3/2004 21:37:08, 208896 bytes
WHQL Logo'd: Yes[/QUOTE]

[/QUOTE] Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_00021002&REV_00
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (70Hz)
Monitor: hp pavilion f70
Monitor Max Res: 1280,1024
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6476 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/25/2004 13:29:04, 209408 bytes
WHQL Logo'd: Yes[/QUOTE]

Ya, he has the 51, and you the 50...
meow
10-12-2004, 11:46 AM
and the chipset name. He has 9600 SE series and mine says nothing about SE. On my adapter info it says pro. This is why im doubting it to be an se. HE has an SE for SURE. I dont know what i have. The reason i dont think mine is an SE is because his dxdiag is different. It has a different chip type than me. If i had an SE,dont you think mine would have te same chiptype as him? AWouldnt it be a pro?
ECA
10-12-2004, 12:02 PM
simple Answer:

Yes.

Not so simple Answer:

Revision of hardware. Making updates and changes to chips is easy, and you OR he may have different version. Ram does mean something, but mostly In TYPE and SPEED.

I post the Compare chart....YOURS IS 400, PRO is 600 RAM speed.
You have the 9600, or the 9600SE...

9600 is 128bit pipe, and SE is 64.. you get 2x's the speed refresh..
meow
10-12-2004, 12:13 PM
k so i guess i have the SE. It works awesome for me though. Runnin CAll of Duty demo maxed out...smoothe...anyways thanks for da help.
Slick
12-03-2004, 02:05 PM
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 SE AGP (0x4151)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4151&SUBSYS_40301458&REV_00
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6467 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/3/2004 21:37:08, 208896 bytes
WHQL Logo'd: Yes[/QUOTE]

[/QUOTE] Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_00021002&REV_00
Display Memory: 128.0 MB
Current Mode: 1024 x 768 (32 bit) (70Hz)
Monitor: hp pavilion f70
Monitor Max Res: 1280,1024
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6476 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 8/25/2004 13:29:04, 209408 bytes
WHQL Logo'd: Yes[/QUOTE]

Ya, he has the 51, and you the 50...[/QUOTE]



the dif is se has 64bit memory interface where as the other 1 has 128 also 0x4150 is the pro chip buy a good cooling fan for it change bios to pro ver poof giddy up i get425\600 with out probs on mine