Onkyo's TX-NR1000 reciever is upgradeable

[Ioman]

Onkyo has now adapted the computer industry's architecture of replaceable modules, upgradeable software, and build-to-order marketing with the introduction of the TX-NR1000.

These will make it possible for consumers to upgrade and even customize hardware and software to avoid short-term obsolescence. As new modules become available, customers will have choices, just as they do when purchasing a computer.
"Four years ago, Onkyo introduced the world's first software-upgradeable home theater receiver," said Don Milks, the company's national product & marketing manager. "Since then thousands of owners have been able to keep current with the latest surround technologies from Dolby, DTS, and THX. Now, with the TX-NR1000, we add the ability to upgrade hardware, but we will also be able to add brand new capabilities such as high-tech broadcast reception, advanced networking, processing circuits, and interface standards that don't yet exist."

Today Onkyo is announcing the TX-NR1000 THX Ultra2 Network AV receiver with its key audio and video processing and interface features provided on plug-in circuit modules. Now consumers will be able to take advantage of future technologies by replacing a card instead of the entire receiver. The first new modules are scheduled for the Fall of 2004 with anticipated upgrades for new radio technology and for video interface sections. Of course Onkyo will also continue to provide appropriate software upgrades.

The first-production TX-NR1000s will also include two features new to home theater receivers. The first are a pair of iLink(TM) digital inputs that allow bit-for-bit digital transfer of DVD-Audio and SACD audio without violating copy-protection controls. The second is a high quality audio and video HDMI high definition multimedia interface with two inputs and one output for compatibility with the DVI digital video interface found on the newest high-end AV components.

As would be expected of a top of the line receiver, the Onkyo TX-NR1000 is THX Ultra2 certified, with 150 watts of power for each of the seven channels driving 8-ohm speakers. It has all the current THX, Dolby, and DTS processing modes, including Dolby Pro Logic IIx. The receiver has excellent build-quality and uses premium parts throughout, including state-of-the-art Wolfson 192 kHz/24-bit D/A converters for all channels.

The receiver can also be connected to a personal computer network (TCP/IP) via a rear-panel Ethernet port, and uses an included Onkyo Net-Tune(TM) client processor to access MP3 and WMA digital music files stored on a networked PC or to play Internet radio through a networked broadband connection. Up to 11 other Net-Tune(TM) client receivers can run simultaneously on the same network.

The Onkyo TX-NR1000 offers a remarkable level of compatibility and connectivity with more audio/video and audio-only inputs and outputs than almost any home system could ever need. In addition to the iLink(TM) and HDMI connections, there are optical and coaxial digital audio inputs and outputs, RCA stereo inputs and outputs, a phono input, and component, S-video, and composite video connections. The TX-NR1000 also has composite and S-Video upsampling to component video, which greatly simplifies switching and connections when mixing video source components from different generations.

All seven amplifier channels use Onkyo's exclusive WRAT Wide Range Amplifier Technology to provide the 5 Hz to 100-kHz bandwidth called for by today's wide-band audio modes. It has two complete seven-speaker sets of banana plug speaker terminals for two complete systems or for bi-wiring. The receiver has three-zone capability, five 12-volt triggers, three IR outputs, and a bi-directional RS-232 port for software upgrades and connection to home automation systems.

The Onkyo TX-NR1000 will be available in April, with a suggested retail price of $4000.

[Ioman]

Picture 2

[dek]

Any word on the TX-NR1000. It was to ship in April with new modules in the fall. I can't find any recent references to it and it doesn't appear on the Onkyo sight?

Thanks

[rhorn01]

I'm considering bying one of these receivers.
Since it's introduction, some two years ago, has there been any actual module upgrades?

[Ioman]

Good question. I am going to do some digging tonight and will post what I find.

[rhorn01]

This is what I've been able to find out. Found this infor on another fourm. This information is at least two years old tho. based on the dates of the messages.

The card prices vary wildly. The following prices were converted from official Japanese.

Integra Research retail prices (USA street is a bit cheaper - Onkyo and Integra share modules):

Base Video Module - $300
HDMI Module - $500
D4 Module - $200 (Japan Only Probably)
Compnent BNC Module - $150
Component RCA Module - $100
Net Tune Module - $200
AMFM Module - $100
AES/EBU/Multi Channel Module - $150ish (I was quoted discounted - Included in Japan)
Double MultiChannel Input Module - $100 (Educated Guess - Not Available in Japan)

This is the current state of module rumours:
Sirius Radio Module (Likely)
XM Radio Module (Likely)
HDMI 1.1 Module (Almost Certain)
Room Correction Module (Rumour Only)
DAB Radio Module ("Under Consideration" - Likely Europe.Middle East Only)

I made this list a little while ago but prices people have been getting have been
very close to it and it should do fine as a guide.

This is the integra site. Here you can "custom build" your unit with the modules you want.

http://www.integrahometheater.com/buildtoorder.cfm

Click on the module name next to the pic and it will take you to a description of it and the others.


I found nothing regarding the rumored mods..